01384 261412

SUPREME double skin partitioning

An alternative Partitioning System for installations where a smooth interior finish is required. Works offices, clean rooms and storage areas for chemicals and food products


Panels are constructed from 25.4 x 42 x 25.4 x 1.2 mm (18g) cold rolled channels panelled both sides with 0.8 mm (21g) CR4 mild steel sheet with 30 mm Rockwool mineral fibre infill and are joined together using an 'H' section, making the installation very similar to the installation of composite partitioning systems. Panels are available in solid, half-glazed, solid/glazed/solid or borrowed light elevation.

Standard panel sizes

Dado Height

2400, 2700, 3000 mm
1000 mm
1200 mm
47 mm

A range of infill and special size panels can be supplied to maintain final dimensions.

Mullion sizes

50 x 50 x 2.5 mm - up to 2700 mm 80 x 40 x 2.5 mm - 2700 mm and above 100 x 50 x 3.0 mm - to suit installation.

All Two-Way (intermediate) mullions have base plates for floor fixing. Knee braces and/or ladder mullions may be fitted for extra stability.

Standard Door Module Sizes: steel or timber

Side Hung Doors
Double Doors
Slidiing Doors

height 2022 mm width 1000 mm*
height 2022 mm width 1940 mm*
to suit customer's requirements

*Plus overpanel to partition height

Doors can be supplied with single or double glazed vision panels or flush i.e. no vision panel. A full range of non-standard door types, i.e. full height leaves, clear access modules or hospital type leaves are available to order.


Pyroshield are supplied as standard. However, other types of glass and Perspex may also be fitted as required.

Double glazed panels may be supplied using a 14mm sealed unit with 4 mm toughened glass to both sides and retained in the panel by steel glazing beads.

Paint finish

All panels are electrostatically powder-coated in the following standard colours: Grey 10 A 07, Grey 00 A 05, Sandstone 08 B 17 and Stone 10 B 17. Special colours (over 100 in stock) are available at extra cost.

Double Skin Partitioning

  1. 1 Standard Half-Glazed Panel
  2. 2 Intermediate Mullion
  3. 3 Door Unit
  4. 4 Top Capping Channel
  5. 5 Wall Channel
  1. 6 Floor Track
  2. 7 Glass Panel in Clear or Obscure Glass
  3. 8 Corner Section
  4. 9 Standard Solid Panel
  5. 10 Three-Way Junction
  6. 11 ‘H’ Post Joining Section

Baxcrest produce fully detailed layouts for any proposal prior to the commencement of work.


Perforated Sheet Partitioning

perforated partitioning

Perforated Sheet Partitioning; a quality Partitioning System where high security is required, but with light still able to pass through.

All products are designed and manufactured to suit your requirements.